• Item

  • Description
  • Order Info
  • Video
  • Review
  • Questions

Mobile module

4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps

 

SIM switch

2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection

 

Status

Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID

 

SMS

SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP

 

USSD

Supports sending and reading Unstructured Supplementary Service Data messages

 

Black/White list

Operator black/white list

 

Multiple PDN

Possibility to use different PDNs for multiple network access and services

 

Band management

Band lock, Used band status display

 

APN

Auto APN

 

Bridge

Direct connection (bridge) between mobile ISP and device on LAN

 

Passthrough

Router assigns its mobile WAN IP address to another device on LAN

 

WIRELESS
ETHERNET
NETWORK
SECURITY
VPN
MODBUS TCP SLAVE
MODBUS TCP MASTER
MODBUS RTU MASTER (RS232)
MODBUS RTU MASTER (RS485)
MODBUS DATA TO SERVER
MQTT GATEWAY
DNP3
MONITORING & MANAGEMENT
IOT PLATFORMS
SYSTEM CHARACTERISTICS
FIRMWARE / CONFIGURATION
FIRMWARE CUSTOMIZATION
LOCATION TRACKING
SERIAL
USB
INPUT / OUTPUT
POWER
PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS, SIM)
 
PHYSICAL SPECIFICATION
OPERATING ENVIRONMENT
REGULATORY & TYPE APPROVALS
EMI IMMUNITY
PERFORMANCE SPECIFICATIONS
SAFETY

 

Wireless mode

IEEE 802.11b/g/n, Access Point (AP), Station (STA)

 

WiFi security

WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP,

Auto Cipher modes, client separation

 

SSID/ESSID

SSID stealth mode and access control based on MAC address

 

WiFi users

Up to 100 simultaneous connections

 

Wireless Hotspot

Captive portal (Hotspot), internal/external Radius server, built in customizable landing page

 

WAN

1 x WAN port  10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

 

LAN

3 x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

 

Routing

Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP)

 

Network protocols

TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)

 

VoIP passthrough support

H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

 

Connection monitoring

Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

 

Firewall

Port forward, traffic rules, custom rules

 

DHCP

Static and dynamic IP allocation, DHCP Relay, Relayd

 

QoS / Smart Queue Management (SQM)

Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

 

DDNS

Supported >25 service providers, others can be configured manually

 

Network backup

WiFi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic

 

Failover

Load balancing

Balance Internet traffic over multiple WAN connections

 

Hotspot

Internal/external Radius server, captive portal, built in customizable landing page

 

SSHFS

Possibility to mount remote file system via SSH protocol

 

Authentication

Pre-shared key, digital certificates, X.509 certificates

 

Firewall

Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

 

Attack prevention

DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

VLAN

Port and tag based VLAN separation

Mobile quota control

Custom data limits for both SIM cards

 

WEB filter

Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only

 

Access control

Flexible access control of TCP, UDP, ICMP packets, MAC address filter

 

OpenVPN

Multiple clients and a server can run simultaneously, 12 encryption methods

 

OpenVPN Encryption

DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC

 

IPsec

IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)

 

GRE

GRE tunnel

PPTP, L2TP

Client/Server instances can run simultaneously, L2TPv3 support

Stunnel

Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code

 

DMVPN

Method of building scalable IPsec VPNs

SSTP

SSTP client instance support

ZeroTier

ZeroTier VPN client support

WireGuard

WireGuard VPN client and server support

ID range

Respond to one ID in range [1;255] or any

Allow Remote Access

Allow access through WAN

Custom registers

MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality

Supported functions

01, 02, 03, 04, 05, 06, 15, 16

Supported data formats

8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)

Supported baud rates

From 300 to 115200

Supported functions

01, 02, 03, 04, 05, 06, 15, 16

Supported data formats

8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

Number of data bits

From 5 to 8

Number of stop bits

1 or 2

Parity

None, Even, Odd

Flow

None, RTS/CTS, Xon/Xoff

Duplex

Full duplex

Supported baud rates

From 300 to 300000

Supported functions

01, 02, 03, 04, 05, 06, 15, 16

Supported data formats

8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

Number of data bits

8

Number of stop bits

1

Parity

None, Even, Odd

Flow

None, Xon/Xoff

Duplex

Half duplex

Protocol

HTTP(S), MQTT, Azure MQTT

MQTT Gateway

Allows sending commands and receiving data from MODBUS Master through MQTT broker

Supported modes

TCP Master, DNP3 Outstation, RTU Master

WEB UI

HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log

FOTA

Firmware update from server, automatic notification

SSH

SSH (v1, v2)

SMS

SMS status, SMS configuration, send/read SMS via HTTP POST/GET

Call

Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, WiFi on/off

TR-069

OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

MQTT

MQTT Broker, MQTT publisher

SNMP

SNMP (v1, v2, v3), SNMP Trap

JSON-RPC

Management API over HTTP/HTTPS

MODBUS

MODBUS TCP status/control

RMS

Teltonika Remote Management System (RMS)

Cloud of Things

Allows monitoring of: Device data, Mobile data, Network info, Availability

ThingWorx

Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type

Cumulocity

Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength

Azure IoT Hub

Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type

CPU

Mediatek MIPS 24Kc 580 MHz

RAM

128 MB, DDR2

FLASH storage

16 MB, SPI Flash

WEB UI

Update FW from file, check FW on server, configuration profiles, configuration backup, restore point

FOTA

Update FW

RMS

Update FW/configuration for multiple devices at once

Keep settings

Update FW without losing current configuration

Operating system

RutOS (OpenWrt based Linux OS)

Supported languages

Busybox shell, Lua, C, C++

Development tools

SDK package with build environment provided

GNSS

GPS, GLONASS, BeiDou, Galileo and QZSS

Coordinates

GNSS coordinates via WebUI, SMS, TAVL, RMS

NMEA

NMEA 0183

NTRIP

NTRIP protocol (Networked Transport of RTCM via Internet Protocol)

Server software

Supported server software TAVL, RMS

Geofencing

Configurable multiple geofence zones

RS232

DB9 connector, full RS232 (with RTS, CTS)

RS485

RS485 Full Duplex (4 wires) and Half Duplex (2 wires). 300-115200 baud rate

Serial functions

Console, Serial over IP, Modem, MODBUS gateway, NTRIP Client

Data rate

USB 2.0

Applications

Samba share, USB-to-serial

External devices

Possibility to connect external HDD, flash drive, additional modem, printer

Storage formats

FAT, FAT32, NTFS

Input

1 x digital dry input (0 - 3 V), 1 x digital galvanically isolated input (0 - 30 V), 1 x analog input (0 - 24 V), 1 x Digital non-isolated input (on 4-pin power connector, 0 - 5 V detected as logic low, 8 - 30 V detected as logic high)

Output

1 x digital open collector output (30 V, 250 mA), 1 x SPST relay output (40 V, 4 A), 1 x Digital open collector output (30 V, 300 mA, on 4-pin power connector)

Events

Email, RMS, SMS

I/O juggler

Allows to set certain I/O conditions to initiate event

Connector

4-pin industrial DC power socket

Input voltage range

9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max

PoE (passive)

Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, LAN1 Port, 9 - 50 VDC

Power consumption

< 2 W idle, < 7 W Max

Ethernet

4 x RJ45 ports, 10/100 Mbps

I/O’s

2 x Inputs and 2 x Outputs on 10-pin industrial socket, 1 x Digital input and 1 x Digital output on 4-pin power connector (available from HW revision 1600)

Status LEDs

1 x bi-color connection status LED, 5 x connection strength LEDs, 4 x LAN status LEDs, 1 x Power LED

SIM

2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional)

Power

1 x 4-pin power connector

Input/output

1x 10 pin industrial socket for inputs/outputs

Antennas

2 x SMA for LTE, 2 x RP-SMA for WiFi, 1 x SMA for GNSS

USB

1 x USB A port for external devices

RS232

1 x DB9 socket

RS485

1 x 6-pin industrial socket

Reset

Reboot/User default reset/Factory reset button

Casing material

Aluminium housing, plastic panels

Dimensions (W x H x D)

110 x 50 x 100 mm

Weight

287 g

Mounting options

DIN rail (can be mounted on two sides), flat surface placement

Operating temperature

-40 °C to 75 °C

Operating humidity

10% to 90% non-condensing

Ingress Protection Rating

IP30

Regulatory

CE/RED, UKCA, CB

Standards

EN 301 489-1 V2.2.3, EN 301 489-17 V3.2.4, Draft EN 301 489-19 V2.2.0, Final draft EN 301 489-52 V1.2.0, EN 55032:2015+A1:2020, EN 55035:2017+A11:2020, EN 61000-3-3:2013+A1:2019, EN IEC 61000-3-2:2019

ESD

EN 61000-4-2:2009

RS

EN 61000-4-3:2020

EFT

EN 61000-4-4:2012

Surge immunity (AC Power Line)

EN 61000-4-5:2014+A1:2017

CS

EN 61000-4-6:2009

DIP

EN IEC 61000-4-11:2020

Standards

EN 300 328 V2.2.2, EN 301 908-1 V13.1.1, EN 301 908-2 V13.1.1, EN 301 908-13 V13.1.1, EN 303 413 V1.1.1

Standards

EN IEC 62311:2020

AS/NZS 60950.1:2015

IEC 62368-1:2018,

EN IEC 62368-1:2020+A11:2020

Revolution Technology BD has made the shopping easier for its customers. Please follow those easy steps to start shopping and stay connected with us:

  • From home page click > Register Button.
  • Register to our website with: Name + Email + Mobile No. + Password.
  • After entry all information click Create Account.
  • After register you automatically login into our website, or you will also login our website by clicking Login button form home page.
  • After clicking Login button provide your mobile no and password, then click Sign Up (*You can also create an account from here).
  • Now choose your desire product and click Buy Now button.
  • Now you can view your products details, Click Add to Cart button.
  • Your product is added to cart, now click Item box (*Upper right corner).
  • Now you automatically go to Shopping cart page.
  • From Shopping Cart page if you want to buy more products click Continue Shopping button.
  • After add your all products to cart click, Click Here to Address button.
  • Provide your Full Name, Valid Phone Number, Valid Email & Delivery Address.
  • Then click Order Submit button.
  • Now you will see your Bill Invoice and received an email for submitting your order.
  • You can print this Invoice by clicking Print button.
  • Your order has been placed, now wait for a little time for delivery. We will inform you all update about your order.
  • Thank you for shopping with us.

Add your review

Your Rating
Your Review

Ask a question

Related Products

We Accept
VISA
MasterCard
NexusPay
bKash
Rocket
Nagad
uPay
CityTouch
BracBank
BankAsia
Members Of
BCS

Copyright © 2024 Revolution Technology BD All Rights Reserved