Brand: Teltonika
Model: TRB142
Connectivity: 4G/LTE, 3G, 2G
Mobile module: 4G (LTE) – Cat 1 up to 10
Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
Status: Signal strength (RSSI), SINR,
RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
SMS: SMS status, SMS configuration,
send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS
to SMS, scheduled SMS, SMS autoreply, SMPP
USSD: Supports sending and reading
Unstructured Supplementary Service Data messages
Black/White list: Operator black/white
list
Multiple PDN: Possibility to use
different PDNs for multiple network access and services
Band management: Band lock, Used band
status display
APN: Auto APN
Bridge: Direct connection (bridge)
between mobile ISP and device on LAN
Passthrough: Gateway assigns its mobile
WAN IP address to another device on LAN
NETWORK
Routing: Static routing
Network protocols: TCP, UDP, IPv4, IPv6,
ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE,
UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT
VoIP passthrough support: H.323 and
SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoring: Ping Reboot, Wget
Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall: Port forward, traffic rules,
custom rules
Firewall status page: View all your
Firewall statistics, rules, and rule counters
Ports management: View device ports, enable
and disable each of them, turn auto-configuration on or off, change their
transmission speed, and so on
Network topology: Visual representation
of your network, showing which devices are connected to which other devices
DHCP: Static and dynamic IP allocation,
DHCP Relay
QoS / Smart Queue Management (SQM): Traffic
priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNS: Supported >25 service
providers, others can be configured manually
Network backup: Mobile, VRRP, Wired
options, each of which can be used as an automatic Failover
SECURITY
Authentication: Pre-shared key, digital
certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts
block
Firewall: Pre-configured firewall rules
can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT;
NAT-T
Attack prevention: DDOS prevention (SYN
flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port
scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN: Port and tag-based VLAN separation
Mobile quota control: Mobile data limit,
customizable period, start time, warning limit, phone number
WEB filter: Blacklist for blocking out
unwanted websites, Whitelist for specifying allowed sites only
Access control: Flexible access control
of SSH, Web interface, CLI and Telnet
VPN
OpenVPN; Multiple clients and a server
can run simultaneously, 27 encryption methods
OpenVPN Encryption: DES-CBC 64, RC2-CBC
128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,
BF-CBC 128, RC2-40-CBC 40, CAST5-CBC
128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128,
AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192,
AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192,
AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256,
AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
IPsec; IKEv1, IKEv2, with 14 encryption
methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8,
AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16,
AES256GCM16)
GRE: GRE tunnel, GRE tunnel over IPsec
support
PPTP, L2TP
Client/Server instances can run
simultaneously, L2TPv3, L2TP over IPsec support
Stunnel: Proxy designed to add TLS
encryption functionality to existing clients and servers without any changes in
the program’s code
MONITORING
& MANAGEMENT
WEB UI: HTTP/HTTPS, status,
configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
FOTA: Firmware update from server,
automatic notification
SSH: SSH (v1, v2)
SMS: SMS status, SMS configuration,
send/read SMS via HTTP POST/GET
Call: Reboot, Status, Mobile data
on/off, Output on/off, answer/hang-up with a timer
SYSTEM
CHARACTERISTICS
CPU: ARM Cortex-A7 1.2 GHz
RAM: 128 MB, DDR2
FLASH storage: 512 MB, SPI Flash
FIRMWARE
/ CONFIGURATION
WEB UI: Update FW from file, check FW on
server, configuration profiles, configuration backup
FOTA: Update FW
RMS; Update FW/configuration for
multiple devices at once
Keep settings: Update FW without losing
current configuration
FIRMWARE
CUSTOMISATION
Operating system: RutOS (OpenWrt based
Linux OS)
Supported languages: Busybox shell, Lua,
C, C++, and Python, Java in Package manager
Development tools: SDK package with
build environment provided
POWER
Connector: 4-pin industrial DC power
socket
Input voltage range: 9 – 30 VDC, reverse
polarity protection; surge protection >31 VDC 10us max
Power consumption: < 5 W
PHYSICAL
INTERFACES
I/O’s: 2 x Configurable I/O pins on 4
pin power connector (I/O not available in TRB142*2****)
Status LEDs: 3 x connection type status
LEDs, 5 x connection strength LEDs, 1 x Power LED
SIM: 1 x SIM slot (Mini SIM – 2FF), 1.8
V/3 V
Power: 1 x 4-pin power connector
Antennas: 1 x SMA for LTE
USB: 1 x Virtual network interface via
micro USB
RS232: 1 x DB9 socket
Reset: Reboot/User default reset/Factory
reset button
Revolution Technology BD has made the shopping easier for its customers. Please follow those easy steps to start shopping and stay connected with us:
