This wireless flash siren is a good helper for your safety. Also, applicable for security & protection at the best prices on our website! This device will ensure your all safety from thieves, gas leakage & fire.
Features:
- WiFi connection, APP intelligent control;
- Wireless communication;
- Maximum support 99 wireless alarm zones, 8 remote controllers, 2 wired zones, anti-tamper zone(factory default is turned off, users can control via APP);
- Support multi-zones type switching, and adapt to more security scenarios;
- Rechargeable lithium battery for continuous working;
WiFi outdoor flash siren alarm
- Power supply: DC 5V/500mA
- Backup battery: 18650 lithium battery 3.7V/2200 mAH
- Alarm current: ≤400mA
- Standby current: ≤50mA
- Wireless standard: WiFi: IEEE 802.11. b/g/n ; RF receiver: 433.92MHz
- RF distance: 70m(open space)
- modulation mode: ASK 1527/2262
- Volume: 80~105dB(1m)
- Wired Zone 1 (Normally open/ Normally closed),
- Wired Zone 2 (Normally open/ Normally closed),
- Anti-tamper zone (default closed, the device can be opened on the APP after installation)
- Alarm panel size: 294mm*193mm*60mm
- Waterproof and dustproof grade: IP33
Door sensor:
- Battery: 3V DC, CR2450 lithium battery
- Static current: ≤3uA
- Alarm current: ≤15mA
- Wireless standard: ASK 433.92MHz
- RF distance: 80m(open space)
- Working environment: -20°C ~ + 55 °C
- Product size: launch box 66mm * 33mm * 16mm
PIR Motion detector:
- Battery: 3V DC, 2 AAA batteries
- Static current: ≤15uA
- Alarm current: ≤20mA
- Wireless standard: ASK 433.92MHz
- RF distance: 80m(open space)
- Detection distance / angle: 110°
- Working environment: -10°C ~ + 55 °C
- Product size: 107mm * 51mm * 40mm (without mounting bracket)
Remote controller:
- Battery: 3V DC, CR2032 lithium battery
- Static current: ≤1uA
- Alarm current: ≤10mA
- Wireless standard: ASK433.92MHz
- RF distance: 80m(open space)
- Working environment: -20°C ~ +55 °C
- Product size: 70mm * 36mm * 11mm
Q&A
- Q1: If the alarm panel failed to connect to the network?
- A: Please check whether the WiFi is normally working or not.
- Q2: If the mobile phone cannot get the alarm push?
- A: Please check whether the mobile phone did the setting: don't accept the push.
- Q3: If the APP shows that the sensors are offline?
- A: Please check if the sensor is enough to power or is normal working.
