CONNECTIVITY: 4G/LTE (Cat 1), 3G,
2G
DURABILITY: Rugged aluminium
housing
SERIAL PORTS: Equipped with RS232
for serial communication
9-30V: Wide range of supported
power supply voltages
COMPACTNESS: Small size, easy
installation
RMS: Compatible with Teltonika
Remote Management System
MOBILE |
|
Mobile module |
4G (LTE) – Cat 1 up to 10 Mbps, 3G –
Up to 42 Mbps, 2G – Up to 236.8 kbps |
Status |
Signal strength (RSSI), SINR, RSRP,
RSRQ, EC/IO, RSCP Bytes sent/received, connected band, IMSI, ICCID. |
SMS/Call |
SMS status, SMS configuration,
send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS
to SMS, scheduled SMS, SMS autoreply, Call utilities |
USSD |
Supports sending and reading
Unstructured Supplementary Service Data messages |
Black/White list |
Operator black/white list |
Band management |
Band lock, Used band status display |
APN |
Auto APN |
Bridge |
Direct connection (bridge) between
mobile ISP and device on LAN |
Passthrough |
Gateway assigns its mobile WAN IP
address to another device on LAN |
Multiple PDN |
Possibility to use different PDNs for
multiple network access and services (optional) |
NETWORK |
|
Routing |
Static routing |
Network protocols |
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS,
HTTP, HTTPS, SMTP, SSL v3, TLS, PPP, SSH, DHCP, SNMP, MQTT |
Connection monitoring |
Ping Reboot, Wget Reboot, Periodic
Reboot, LCP and ICMP for link inspection |
Firewall |
Port forwards, traffic rules, custom
rules |
DHCP |
Static and dynamic IP allocation |
QoS / Smart Queue Management (SQM)
(planned) |
Traffic priority queuing by
source/destination, service, protocol or port |
Supported >25 service providers,
others can be configured manually |
|
SSHFS |
Possibility to mount remote file
system via SSH protocol |
SECURITY |
|
Authentication |
Pre-shared key, digital certificates,
X.509 certificates |
Firewall |
Pre-configured firewall rules can be
enabled via the WebUI, unlimited firewall configuration via CLI; NAT; NAT-T |
Attack prevention |
DDOS prevention (SYN flood protection,
SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (
SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
Mobile quota control |
Set up custom data limits for SIM card |
WEB filter |
Blacklist for blocking out unwanted
websites, Whitelist for specifying allowed sites only |
Access control |
Flexible access control of TCP, UDP,
ICMP packets, MAC address filter |
VPN |
|
OpenVPN |
Multiple clients and a server can run
simultaneously, 12 encryption methods |
OpenVPN Encryption |
DES-CBC, RC2-CBC, DES-EDE-CBC,
DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC,
AES-128-CBC, AES-192-CBC, AES-256-CBC |
IPsec |
IKEv1, IKEv2, supports up to 5 x VPN
IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128,
AES192, AES256) |
GRE |
GRE tunnel |
PPTP, L2TP |
Client/Server services can run
simultaneously, L2TPv3 support |
ZeroTier |
ZeroTier VPN |
WireGuard |
WireGuard VPN client and server
support |
SERIAL COMMUNICATION MODES |
|
Modes |
Console, OverIP, Modem (Full or
Partial control), MODBUS RTU master, MODBUS gateway, NTRIP client (planned) |
MODBUS |
|
MODBUS TCP SLAVE |
|
ID filtering |
Respond to one ID in range [1;255] or
any |
Allow remote access |
Allow access through WAN |
Custom registers |
MODBUS TCP custom register block,
which allows to read/write to a file inside the router, and can be used to
extend MODBUS TCP slave functionality |
MODBUS TCP MASTER |
|
Supported functions |
01, 02, 03, 04, 05, 06, 15, 16 |
Supported data formats |
8 bit: INT, UINT; 16 bit: INT, UINT
(MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA
(little-endian), CDAB, BADC), HEX, ASCII |
MODBUS RTU MASTER |
|
Suported baud rates |
From 300 to 115200 |
Supported functions |
01, 02, 03, 04, 05, 06, 15, 16 |
Supported data formats |
8 bit: INT, UINT; 16 bit: INT, UINT
(MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA
(little-endian), CDAB, BADC), HEX, ASCII |
Number of data bits |
From 5 to 8 |
Number of stop bits |
1 or 2 |
Parity |
None, Even, Odd |
Flow control |
None, RTS/CTS, Xon/Xoff |
MQTT GATEWAY |
|
Gateway |
Allows sending commands and receiving
data from MODBUS Master through the MQTT broker |
DNP3 |
|
Supported modes |
TCP Master, DNP3 Outstation, RTU
Master |
DATA TO SERVER |
|
Protocol |
HTTP(S), MQTT, Azure MQTT, Kinesis |
MONITORING & MANAGEMENT |
|
WEB UI |
HTTP/HTTPS, status, configuration, FW
update, CLI, troubleshoot, system log, kernel log |
FOTA |
Firmware update from sever, automatic
notification |
SSH |
SSH (v1, v2) |
SMS |
SMS status, SMS configuration,
send/read SMS via HTTP POST/GET |
Call |
Reboot, Status, Mobile data on/off,
Output on/off, answer/hang-up with a timer |
TR-069 |
OpenACS, EasyCwmp, ACSLite, tGem,
LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem |
MQTT |
MQTT Broker, MQTT publisher |
JSON-RPC |
Management API over HTTP/HTTPS |
MODBUS |
MODBUS TCP status/control |
RMS |
Teltonika Remote Management System
(RMS) |
IoT PLATFORMS |
|
Cloud of Things |
Allows monitoring of: Device data,
Mobile data, Network info, Availability |
ThingWorx |
Allows monitoring of: WAN Type, WAN IP
Mobile Operator Name, Mobile Signal Strength, Mobile Network Type |
Cumulocity |
Allows monitoring of: Device Model,
Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type,
Operator, Signal Strength, WAN Type and IP |
Azure IoT Hub |
Can send device IP, Number of bytes
send/received/ 3G connection state, Network link state, IMEI, ICCID, Model,
Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA
RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator
number, Connection type, Temperature, PIN count to Azure IoT Hub
server |
SYSTEM CHARACTERISTICS |
|
CPU |
ARM Cortex-A7 1.2 GHz CPU |
RAM |
128 MB (50 MB available for userspace) |
FLASH storage |
512 MB (200 MB available for
userspace) |
FIRMWARE / CONFIGURATION |
|
WEB UI |
Update FW from file, check FW on
server, configuration profiles, configuration backup |
FOTA |
Update FW/configuration from server |
RMS |
Update FW/configuration for multiple
devices |
Keep settings |
Update FW without losing current
configuration |
FIRMWARE CUSTOMIZATION |
|
Operating system |
RutOS (OpenWrt based Linux OS) |
Supported languages |
Busybox shell, Lua, C, C++ |
Development tools |
SDK package with build environment
provided |
INPUT/OUTPUT |
|
Configurable I/O |
2 x Configurable Inputs/Outputs.
Digital input 0 - 5 V detected as logic low, 8 - 30 V detected as logic high.
Open collector output, max output 30 V, 300 mA (not available in
TRB142*2****) |
Output control |
HTTP POST/GET, Schedule |
Events |
SMS, EMAIL |
I/O juggler |
Allows to set certain I/O conditions
to initiate event |
POWER |
|
Connector |
4 pin industrial DC power socket |
Input voltage range |
9 – 30 VDC (4 pin industrial socket),
reverse polarity protection, surge protection >33 VDC 10us max |
Power consumption |
< 5 W |
PHYSICAL INTERFACES (PORTS, LEDS,
ANNTENAS, BUTTONS, SIM) |
|
RS232 |
1 x DB9 socket |
I/Os |
2 x Configurable I/O pins on 4 pin
power connector (I/O not available in TRB142*2****) |
USB |
1 x Virtual network interface via
micro USB |
Status LEDs |
3 x connection type status LEDs, 5 x
connection strength LEDs, 1x Power LED |
SIM |
1 x SIM slot (Mini SIM – 2FF), 1.8 V/3
V |
Power |
1 x 4 pin power connector |
Anntena |
1 x SMA for LTE |
Reset |
Reboot/User default reset/Factory
reset button |
PHYSICAL SPECIFICATIONS |
|
Casing material |
Aluminum housing |
Dimensions (W x H x D) |
74.5 x 25 x 64.4 mm |
Weight |
135 g |
Mounting options |
Bottom and sideways DIN rail, Flat
surface |
OPERATING ENVIRONMENT |
|
Operating temperature |
-40 °C to 75 °C |
Operating humidity |
10 % to 90 % non-condensing |
Ingress Protection Rating |
IP30 |
REGULATORY & TYPE APPROVALS |
|
Regulatory |
CE/RED, EAC, RoHS, WEEE |
EMI |
|
Standards |
Draft ETSI EN 301 489-1 V2.2.0, Draft
EN 301 489-19 V2.1.0, Draft ETSI EN 301 489-52 V1.1.0 |
ESD |
EN 61000-4-2:2009 |
RS |
EN 61000-4-3:2006 + A1:2008 + A2:2010 |
EFT |
EN 61000-4-4:2012 |
Surge protection |
EN 61000-4-5:2014 |
CS |
EN 61000-4-6:2014 |
DIP |
EN 61000-4-11:2004 |
RF |
|
Standards |
EN 300 511 V12.5.1, ETSI EN 301 908-1
V11.1.1, ETSI EN 301 908-2 V11.1.2, ETSI EN 301 908-13 V11.1.2 |
SAFETY |
|
Standards |
IEC 62368-1:2014(Second Edition), EN
62368-1:2014+A11:2017 |
USE CASE
1) UNINTERRUPTABLE CONNECTIVITY FOR
INDUSTRIAL CLIMATE CONTROL
Many countries are still developing
their power supply or expanding it together with the growth of cities. This
race to meet the ever-growing demand for power leads to grid stability
problems. Many industrial IoT setups face issues like devices
restarting or electronics getting damaged without a stable electricity supply.
One of the examples is the need for constant connectivity to gather and
transmit essential data from warehouses or production lines. If a power outage
occurs, connectivity is also interrupted.
2) SMART GRID & SUBSTATION
COMMUNICATION
The energy market is one of the most crucial industry sectors enabling our everyday lives. It requires constant development and innovation to make it more accessible and efficient. Industrial Internet of Things is a movement towards more connectivity & control in every aspect of industry digitization, and the energy industry is no exception.
Revolution Technology BD has made the shopping easier for its customers. Please follow those easy steps to start shopping and stay connected with us: