S6720-50L-HI-48S Specification |
|
Switching
Capacity |
2.56 Tbit/s |
Fixed Ports |
48 x 10
Gigabit SFP+, 6 x 40 Gigabit QSFP+ or 44 x 10 Gigabit SFP+, 4 x 40
Gigabit QSFP+, and 2 x 100 Gigabit QSFP28 |
Extended
Slots |
Not supported |
MAC Address
Table |
64K MAC
address entries |
VLAN Features |
4,094 VLANs |
IP Routing |
Static
routes, RIP v1/2, RIPng, OSPF, OSPFv3, IS-IS, IS-ISv6, BGP, BGP4+, ECMP, and
routing policy |
Interoperability |
VLAN-Based
Spanning Tree (VBST) (interoperating with PVST, PVST+, and RPVST) |
Wireless
service |
AP access
control, AP domain management, and AP configuration template management Radio
management, unified static configuration, and dynamic centralized management WLAN basic
services, QoS, security, and user management CAPWAP,
tag/terminal location, and spectrum analysis |
Ethernet
loop protection |
RRPP ring
topology and RRPP multi-instance Smart Link
tree topology and Smart Link multi-instance, providing millisecond-level
protection switchover SEP ERPS (G.8032) BFD for OSPF,
BFD for IS-IS, BFD for VRRP, and BFD for PIM STP (IEEE
802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) BPDU protection,
root protection, and loop protection |
MPLS |
MPLS L3VPN MPLS L2VPN
(VPWS/VPLS) MPLS-TE MPLS QoS |
IPv6 features |
Neighbor
Discover (ND) PMTU IPv6 Ping,
IPv6 Tracert, IPv6 Telnet ACLs based on
source IPv6 addresses, destination IPv6 addresses, Layer 4 ports, or protocol types Multicast
Listener Discovery snooping (MLDv1/v2) IPv6
addresses configured for sub-interfaces, VRRP6, DHCPv6, and L3VPN |
Multicast |
IGMP v1/v2/v3
snooping and IGMP fast leave Multicast
forwarding in a VLAN and multicast replication between VLANs Multicast
load balancing among member ports of a trunk Controllable
multicast Port-based
multicast traffic statistics IGMP
v1/v2/v3, PIM-SM, PIM-DM, and PIM-SSM MSDP Multicast VPN |
QoS/ACL |
Rate limiting
in the inbound and outbound directions of a port Packet
redirection Port-based
traffic policing and two-rate three-color CAR HQoS Eight queues
on each port DRR, SP, and
DRR+SP queue scheduling algorithms WRED Re-marking of
the 802.1p and DSCP fields of packets Packet
filtering at Layer 2 to Layer 4, filtering out invalid frames based on the
source MAC address, destination
MAC address, source IP address, destination IP address, TCP/UDP
source/destination port number,
protocol type, and VLAN ID Queue-based
rate limiting and shaping on ports |
Security |
Hierarchical
user management and password protection DoS attack
defense, ARP attack defense, and ICMP attack defense Binding of
the IP address, MAC address, port number, and VLAN ID Port
isolation, port security, and sticky MAC MAC Forced
Forwarding (MFF) Blackhole MAC
address entries Limit on the
number of learned MAC addresses IEEE 802.1X
authentication and limit on the number of users on a port AAA
authentication, RADIUS authentication, and HWTACACS authentication NAC SSH V2.0 HTTPS CPU
protection Blacklist and
whitelist Attack source
tracing and punishment for IPv6 packets such as ND, DHCPv6, and MLD packets IPSec for
management packet encryption |
Reliability |
LACP E-Trunk Ethernet OAM
(IEEE 802.3ah and IEEE 802.1ag) ITU-Y.1731 DLDP LLDP BFD for BGP,
BFD for IS-IS, BFD for OSPF, BFD for static routes |
VXLAN |
VXLAN
functions, VXLAN L2 and L3 gateways, BGP EVPN VXLAN
configuration using NETCONF/YANG |
SVF |
Acting as the
parent node to vertically virtualize downlink switches and APs as one device
for management Two-layer
client architecture ASs can be
independently configured. Services not supported by templates can be
configured on the parent
node. Third-party
devices allowed between SVF parent and clients |
iPCA |
Marking
service packets to obtain the packet loss ratio and number of lost packets in
real time Measurement
of the number of lost packets and packet loss ratio on networks and devices |
Management
and maintenance |
Cloud-based
management Virtual cable
test SNMP
v1/v2c/v3 RMON Web-based NMS System logs
and alarms of different severities GVRP MUX VLAN 802.3az
Energy Efficient Ethernet (EEE) NetStream Dying gasp
upon power-off |
Dimensions (W
x D x H) |
442 mm x 420
mm x 43.6 mm |
Height |
1U |
Input voltage |
AC: Rated AC
voltage: 100V to 240V AC; 50/60 Hz Max. AC
voltage: 90V to 264V AC; 47–63 Hz DC: Rated DC
power: –48V to 60V DC Max. DC
voltage: –38.4V to 72V DC |
Maximum
power consumption |
279W |
Power
consumption (30% traffic load) |
194W |
Operating
temperature |
- 0–1800 m
altitude: 0°C to 45°C - 1800–5000 m
altitude: The operating temperature reduces by 1°C every time the altitude increases by
220 m. |
Relative
humidity |
5% to 95%
(non-condensing) |
Heat
dissipation |
Heat
dissipation with fan, intelligent fan speed adjustment |
Revolution Technology BD has made the shopping easier for its customers. Please follow those easy steps to start shopping and stay connected with us: