WolfGuard Outdoor WiFi Alarm Siren

This wireless flash siren is a good helper for your safety. Also, applicable for security & protection at the best prices on our website! This device will ensure your all safety from thieves, gas leakage & fire. 

Features: 

• WiFi connection, APP intelligent control;
• Wireless communication;
• Maximum support 99 wireless alarm zones, 8 remote controllers, 2 wired zones, anti-tamper zone(factory default is turned off, users can control via APP);
• Support multi-zones type switching, and adapt to more security scenarios;
• Rechargeable lithium battery for continuous working;

WiFi outdoor flash siren alarm

• Power supply: DC 5V/500mA
• Backup battery: 18650 lithium battery 3.7V/2200 mAH
• Alarm current: ≤400mA
• Standby current: ≤50mA
• Wireless standard: WiFi: IEEE 802.11. b/g/n ; RF receiver: 433.92MHz
• RF distance: 70m(open space)
• modulation mode: ASK 1527/2262
• Volume: 80~105dB(1m)
• Wired Zone 1 (Normally open/ Normally closed),
• Wired Zone 2 (Normally open/ Normally closed),
• Anti-tamper zone (default closed, the device can be opened on the APP after installation)
• Alarm panel size: 294mm*193mm*60mm
• Waterproof and dustproof grade: IP33

Door sensor:

• Battery: 3V DC, CR2450 lithium battery 
• Static current: ≤3uA 
• Alarm current: ≤15mA 
• Wireless standard: ASK 433.92MHz 
• RF distance: 80m(open space) 
• Working environment: -20°C ~ + 55 °C 
• Product size: launch box 66mm * 33mm * 16mm

PIR Motion detector: 

• Battery: 3V DC, 2 AAA batteries 
• Static current: ≤15uA
• Alarm current: ≤20mA 
• Wireless standard: ASK 433.92MHz
• RF distance: 80m(open space)
• Detection distance / angle: 110°
• Working environment: -10°C ~ + 55 °C 
• Product size: 107mm * 51mm * 40mm (without mounting bracket)

Remote controller:

• Battery: 3V DC, CR2032 lithium battery
• Static current: ≤1uA 
• Alarm current: ≤10mA 
• Wireless standard: ASK433.92MHz
• RF distance: 80m(open space) 
• Working environment: -20°C ~ +55 °C 
• Product size: 70mm * 36mm * 11mm

Q&A

•  Q1: If the alarm panel failed to connect to the network?
•  A: Please check whether the WiFi is normally working or not.
•  Q2: If the mobile phone cannot get the alarm push? 
•  A: Please check whether the mobile phone did the setting: don't accept the push. 
•  Q3: If the APP shows that the sensors are offline?
•  A: Please check if the sensor is enough to power or is normal working.